Skylight Installation Toronto: Residential, Commercial, Velux-Certified & Custom Skylights for Toronto GTA Homes and Buildings

Skylight Installation Toronto installs residential skylights in kitchens, bathrooms, bedrooms, attics, stairwells, garages and additions across Toronto, Mississauga, Vaughan, Markham, Oakville and the rest of the GTA. We cut the roof, frame doubled headers, build or set a factory curb, flash to OBC 9.26 with Grace Ice & Water Shield, and finish a drywall or shiplap light shaft so natural daylight reaches the room exactly where it is needed. Residential installs run $2,500 for a Velux FS 2x4 fixed unit up to $7,500 for a Velux VSS solar-powered opening with laminated glass and a rain sensor, with Fakro FTT, FXP and FXZ options for budget-conscious projects. Every install is finished to OBC 9.7 fenestration compliance, backed by WSIB crews with $5M CGL, Velux Certified Installer status since 2004, and a written workmanship warranty on flashing and glass.

Skylight Installation Toronto handles commercial skylight installation across office towers, retail plazas, warehouses, restaurants, schools and medical buildings in Toronto and the GTA. We design, frame, flash and tie into TPO, EPDM, SBS and PVC roof systems without voiding the building warranty or shutting down the tenants below, and we coordinate crane lifts, after-hours access and permit filing so the install does not stop the business from running. Commercial jobs run from a single office daylight unit at $8,000 to a 14-panel lobby atrium at $65,000, with Velux CFP, Velux CVP, Fakro DXW walkable, Fakro DMC smoke-vent and custom-fabricated units on offer depending on fire-rating and daylight needs. Every install carries WSIB, $5M CGL, OBC 9.7 fenestration compliance, OBC 9.26 flashing to Grace Ice & Water Shield standard, and a written workmanship warranty.

Skylight Installation Toronto installs flat-roof skylights on condo terraces, laneway suites, rear additions, commercial roofs and modern residential cubes across Toronto and the GTA. We build raised insulated curbs on low-slope roofs, flash into TPO, EPDM, SBS and modified bitumen membranes, and set Velux CFP flat glass, Velux CVP curb-mount or Fakro DXW walkable units so ponding water, drifting snow and freeze-thaw never reach the opening. Flat-roof projects run from $3,500 for a single CFP install on a residential addition up to $45,000 for a walkable terrace or multi-panel commercial array. Every job carries WSIB-covered crews, $5M CGL, OBC 9.7 fenestration compliance, laminated or tempered glass to code, and a written workmanship warranty on the curb flashing, membrane tie-in and glazing seal.

Skylight Installation Toronto designs and installs custom skylights for heritage homes, architect-led renovations, atria, cathedral ceilings and one-off ridgeline openings across Toronto and the GTA. We shop-fabricate laminated and tempered insulated glass units in sizes beyond standard Velux and Fakro inventory, build raised insulated curbs, engineer slope-matched flashing, and finish interior shafts to the drywall or plaster the architect calls for. Custom jobs typically run $10,000 to $65,000 depending on glass area, structural framing, Low-E and SHGC targets, and whether a drone-captured as-built or stamped structural letter is needed. Our in-house crew works directly with Toronto architects, heritage preservation officers and Permit Review on OBC 9.7 fenestration and Part 3 commercial submissions, and every build is backed by a written workmanship warranty on flashing and structural tie-in.

Skylight Installation Toronto replaces leaking, fogged, drafty and outdated home skylights across Toronto, Mississauga, Vaughan, Markham, Oakville and the GTA. We lift the old unit, inspect and repair the curb and deck framing, install new ice-and-water shield around the perimeter, then set a Velux FS, Velux VSS, Fakro FTT or Fakro FXP unit with a fresh factory flashing kit matched to your roof type. Same-size residential swaps run $2,200 to $4,800, with Low-E glass and laminated upgrades available depending on orientation and energy targets. Most installs finish in a single day with drop sheets inside and no drywall tear-out, and every replacement is backed by OBC 9.7 compliance, WSIB-covered crews with $5M CGL, written parts-and-labour warranty, and a lifetime leak-free flashing warranty on our install.

Skylight Installation Toronto handles commercial skylight replacement across offices, libraries, retail plazas, atria and industrial roofs in Toronto and the GTA. We stage phased removal of failing acrylic domes, fogged glass units and leaking atrium panels, then tie in new Velux CFP, Velux CVP, Fakro DMG or Fakro DXW units with fresh membrane seams, fall-protection screens and interior containment so the business stays open through the swap. Projects run from a single same-size swap at $6,000 to a $65,000 Vaughan Metropolitan Centre office-tower atrium, and we often time the work with a scheduled re-roof to share mobilization costs with the roofer. Every unit is backed by WSIB-covered crews, $5M CGL, OBC 9.7 compliance, Velux 10/20-year or Fakro 10-year product warranty passthrough, and a lifetime leak-free flashing warranty on our install.

Skylight Installation Toronto removes and replaces old acrylic domes, rotted curbs, failed-seal units and leaking skylights from 1980s and 1990s Toronto homes across Mississauga, Scarborough, Brampton, Etobicoke and the rest of the GTA. We tear off the dome, assess and repair rotted deck and curb framing, then convert the opening to a modern Low-E glass Velux FS or Fakro FTT skylight or close it permanently with framing, sheathing and roofing matched to the surrounding assembly. Removal-and-replacement runs $2,200 to $4,800 for a standard same-size swap, more if the curb framing is water-damaged. Every job includes OBC 9.7 flashing, laminated or tempered glass, written parts-and-labour warranty, WSIB-covered crews with $5M CGL, and a permanent close option if you decide the opening is no longer worth maintaining.

Skylight Installation Toronto diagnoses and repairs skylight leaks caused by winter ice dams, failed flashing, condensation and post-reroof seal failures across Toronto, Mississauga, Vaughan, Markham, Oakville and the rest of the GTA. We start with a sequenced water test and thermal imaging to find the real entry point, then rebuild flashing, replace failed seals or close ice-dam gaps with Grace Ice & Water Shield and new step-flashing. Leak repairs run $350 to $1,800 depending on cause and roof type, and most jobs finish in a single visit with full before-and-after photo documentation for your insurance adjuster. Every repair is backed by OBC 9.26 flashing compliance, written parts-and-labour warranty, and a 24/7 emergency line for storm-related leaks across the GTA.

Skylight Installation Toronto replaces cracked, fogged, failed-seal and cloudy skylight glass units across Toronto, Mississauga, Vaughan, Markham, Oakville and the rest of the GTA. We measure the existing frame, order a matching Low-E, laminated or tempered insulated glass unit from Velux Canada, Fakro Canada or a Toronto glass fabricator, then swap the pane out of the existing curb and gasket in a single visit. Glass-only replacement runs $450 to $1,500 per unit depending on size, glazing type and whether argon-fill or Low-E coating is specified. Most swaps finish in half a day with no drywall or shaft disturbance, and every pane is backed by Velux 10-year or Fakro 10-year glass warranty passthrough plus a written workmanship warranty on our seal and gasket work.

Skylight Installation Toronto rebuilds and repairs skylight flashing on shingle, metal, tile, cedar shake and brick-abutting roofs across Toronto and the GTA. We strip the failed flashing, assess deck and curb condition, install new Grace Ice & Water Shield around the perimeter, then set a pre-engineered Velux EDL, EDM, EDW or Fakro ELV flashing kit matched to your roof type and pitch. Flashing repairs run $400 to $1,800 depending on roof type, access and whether the curb needs rebuilding, with no-nail step-flashing on tile and copper hand-forming on heritage brick abutments. Every repair is backed by OBC 9.26 compliance, Velux Certified Installer status since 2004, and a written workmanship warranty, since nine times out of ten failed flashing is where the previous installer cut the corner.

Skylight Installation Toronto runs a 24/7 emergency skylight service for storm leaks, broken glass, failed flashing and after-hours water intrusion across Toronto and the GTA. One of our installers answers the phone, dispatches a tarp-and-contain truck within hours, and begins drying and documenting the damage for insurance before any permanent repair starts. After-hours service calls are $650 to $1,200 flat plus $150 per hour on site, with full tarping, interior containment, moisture mapping and photo documentation included so your adjuster has what they need. Follow-up permanent work carries WSIB coverage, $5M CGL, OBC 9.7 flashing standard, written parts-and-labour warranty, and most storm repairs are back to weather-tight within one business day.

Skylight Installation Toronto handles Velux Certified installation of FS fixed, VS manual venting, VCS electric venting, VSS solar-powered and FSR replacement units across Toronto, Mississauga, Vaughan, Markham, Oakville and the rest of the GTA. We follow the Velux model-specific protocol, fit the correct EDL, EDM or EDW flashing kit for your roof type, and register the full factory warranty on your behalf. Velux installs run $2,800 for an FS fixed in a residential kitchen up to $7,500 for a VSS solar-powered opening with laminated glass and rain sensor. Every install includes OBC 9.7 fenestration compliance, Velux Certified Installer status since 2004, Velux 10/20-year product warranty registration, and a written workmanship warranty on flashing and structural tie-in, with parts arriving on time through our direct Velux Canada dealer account.

Skylight Installation Toronto replaces old Velux units with new FS, VS, VCS, VSS or FSR models across Toronto, Mississauga, Vaughan, Markham, Oakville and the rest of the GTA. We also handle brand-switch curb retrofits where an old Fakro or acrylic dome unit is swapped onto a new Velux-fit curb, so you can standardize to a single brand with Velux Certified installation and warranty support. Velux replacement runs $2,500 for a same-size FS swap up to $7,500 for a VSS solar-powered unit with laminated glass and Low-E, with brand-switch curb retrofits adding $800 to $1,500. Every replacement includes Velux Certified Installer status since 2004, OBC 9.7 fenestration compliance, Velux 10/20-year product warranty passthrough, and a written workmanship warranty on flashing, curb retrofit and glass seal.

Skylight Installation Toronto supplies and installs Velux blinds and accessories including blackout blinds, light-filtering roller blinds, duo blinds, motorized Pick and Click shades and smart app-controlled blinds across Toronto, Mississauga, Vaughan, Markham and the rest of the GTA. We measure, order the correct Velux FSK, DSK or RSL blind for your skylight model, and install it with the matching mounting brackets and Velux Active hub where needed. Blind and accessory installs run $300 to $900 per blind depending on size, blackout versus light-filtering, and whether motorization or smart control is added. All blinds are backed by Velux 5-year warranty passthrough, Velux Certified Installer status since 2004, written workmanship warranty on our install, and in-stock access through our direct Velux Canada dealer account for faster delivery.

Skylight Installation Toronto installs solar-powered skylights for Toronto homeowners who want venting daylight without running an electrical line to the roof. We install Velux VSS solar-powered opening skylights with integrated solar panels, backup rain sensors and remote-control openers, flashed to OBC 9.7 and finished with laminated glass for interior safety. Solar-powered installs run $4,500 to $7,500 per unit depending on size and whether a sun tunnel light kit or Velux Active hub is bundled, with no ESA permit required since there is no hardwired power. Every install is backed by Velux Certified Installer status since 2004, Velux 10/20-year product warranty passthrough, written parts-and-labour warranty, and WSIB-covered crews with $5M CGL.

Skylight Installation Toronto installs sun tunnels and tubular daylight devices for dark hallways, closets, interior bathrooms and basement stairwells where a full skylight will not fit across Toronto and the GTA. We drill a 10-inch, 14-inch or 22-inch roof penetration, run a reflective rigid or flexible tube through the attic, and finish the ceiling diffuser so the room gets natural daylight without ceiling access to the roof. Sun tunnel installs run $1,800 for a basic Velux TGR 10-inch kit up to $2,900 for a Velux TMR flexible 22-inch rigid-tube install with solar night light and dimmer. Every install includes OBC 9.7 compliance, factory flashing kit matched to your roof type, Velux Certified Installer status since 2004, and a written workmanship warranty on roof penetration and ceiling diffuser seal.

Skylight Installation Toronto installs smart rain-sensor skylights that close themselves at the first drop across Toronto, Mississauga, Vaughan, Markham, Oakville and GTA cottages, lofts and vacation homes. We install Velux VSS solar-powered venting units and Fakro FTP-V automatic openers wired to roof-mounted rain sensors, with Velux Active with Netatmo or Fakro Z-Wave for app control from your phone. Rain-sensor installs run $4,500 to $7,500 per unit depending on glass size, Low-E upgrades and whether the Velux Active hub is already in place. Every install includes OBC 9.7 fenestration compliance, factory flashing kit for your roof type, written parts-and-labour warranty, and Velux Certified Installer status since 2004 so the full factory warranty is registered and honoured.